Rear Wiper Switch

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the console top panel, if equipped.
3. Unsnap and pull up the forward end of the console finish panel to gain access to the instrument panel finish panel screws.
4. Remove the two instrument panel finish panel screws.
5. Pull the instrument panel finish panel away from the instrument panel to gain access to the rear window wiper switch electrical connector.
6. Disconnect the rear window wiper switch electrical connector.
7. Squeeze the attaching tabs and remove the rear window wiper switch from the front of the instrument panel finish panel.

INSTALLATION
To install, reverse the removal procedure.