Horn Switch: Service and Repair

REMOVAL

WARNING: THE BACKUP POWER SUPPLY ENERGY MUST BE DEPLETED BEFORE ANY AIR BAG COMPONENT SERVICE IS PERFORMED. TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND WAIT ONE MINUTE.

1. Disconnect the battery ground cable and wait one minute for the backup power supply energy to be depleted.
2. Remove the driver side air bag module.





3. Slide each horn blow switch off of each horn blow switch attaching arm.
4. Remove the horn blow switch.

INSTALLATION
To install, reverse the removal procedure. Verify that the air bag light is operative.