Front
REMOVAL1. Disconnect the battery ground cable.
2. Remove the front wheel and tire assembly.
3. Remove the two front brake anti-lock sensor bolts. Remove the front brake anti-lock sensor from the front wheel knuckle.
4. Remove the routing bracket from the spring and shock assembly.
5. Remove the routing bracket from the inner fender well.
6. Disconnect the front brake anti-lock sensor electrical connector.
7. Remove the front brake anti-lock sensor.
INSTALLATION
1. Route the front brake anti-lock sensor wiring harness in the vehicle. Connect the front brake anti-lock sensor electrical connector.
NOTE: The left and right front brake anti-lock sensors are not interchangeable. "L" or "R" is indicated on the bracket.
Make sure that the wiring harness will clear all suspension components.
2. Install the routing bracket onto the inner fender well. Tighten the routing bracket nut to 8-10 Nm (71-88 inch lbs.).
3. Install the routing bracket onto the spring and shock. Tighten the routing bracket bolt to 18-25 Nm (13-19 ft. lbs.).
4. Install the front brake anti-lock sensor into the front wheel knuckle. Tighten the front brake anti-lock sensor bolts to 16-23 Nm (12-17 ft. lbs.).
5. Ensure that the clearance between the front brake anti-lock sensor and front brake anti-lock sensor indicator is 0.3-1.1 mm (0.012-0.043 inch).
6. Install the front wheel and tire assembly. Tighten the lug nut to 88-118 Nm (65-87 ft. lbs.).