Air Flow Meter/Sensor: Service and Repair

REMOVAL AND INSTALLATION
1. Disconnect the battery ground cable.

Mass Air Flow Sensor:

2. Disconnect the Mass Air Flow (MAF) sensor connector.
3. Disconnect the Intake Air Temperature (IAT) sensor connector.
4. Loosen the engine air cleaner tube clamp at the air cleaner to intake manifold tube.
5. Remove the engine air cleaner upper cover.
6. Remove the four MAF sensor bolts.
7. Remove the MAF sensor from the engine air cleaner upper cover.

8. To install, reverse the removal procedure.
- Tighten the MAF sensor bolts to 8-10 Nm (71-88 in Lb).
- Tighten the engine air cleaner tube clamps to 1.4-2.5 Nm (15-22 in lb).