Initial Inspection and Diagnostic Overview

1. Verify customer concern by operating the illuminated entry system.
2. Visually inspect the components of the illuminated entry system.

Electrical
- Blown fuse(s):
+ 15 A METER.
+ 15 A R00M.
- Damaged bulb(s).
- Damaged wiring harness.
- Loose or corroded connections.

3. Check the wiring harness for obvious signs of shorts, opens, bad connections, or damage.
4. If fault is not visually evident, determine the symptom and proceed to the symptom chart. Symptom Related Diagnostic Procedures