Disassembly and Assembly

DISASSEMBLY
1. Mount the engine in a work stand and remove all-parts not furnished with the new cylinder block assembly, following the procedures in engine disassembly and assembly.
2. Remove the cylinder head to block dowels.
3. Remove the engine block plugs. Discard the old engine block plugs.

ASSEMBLY
1. Clean the gasket and sealing surfaces of all the serviceable parts and assemblies.
2. Position the new cylinder block assembly in a work stand and install the cylinder head to block dowels.
3. Install the new engine block plugs.
4. Transfer all serviceable parts removed from the used cylinder block assembly, following the procedures in disassembly and assembly.
5. Check all assembly clearances and correct as necessary.