Front

REMOVAL
1. Open the sliding roof panel approximately 100 mm (3.9 inches).
2. Remove the roof headlining.
3. Use tape to connect one end of the new sliding roof panel drain hose to the old sliding roof panel drain hose end in the cowl side panel.







4. Disconnect the old sliding roof panel drain hose from the roof opening frame and the front body pillar.

INSTALLATION







1. Route and install the new sliding roof panel drain hose when removing the old sliding roof panel drain hose.
2. Discard the old sliding roof panel drain hose.
3. Apply soapy water to the end of the new sliding roof panel drain hose, and connect the sliding roof panel drain hose to the roof opening frame and the front body pillar.
4. Install the roof headlining.