Front Washer Pump and Reservoir

REMOVAL
1. Remove LH inner front fender splash shield.
2. Disconnect electrical connector to windshield washer pump.
3. Remove screw retaining windshield washer reservoir to inner front fender.
4. Disconnect windshield washer hose from windshield washer reservoir.

NOTE: Windshield washer reservoir will drain with windshield washer hose disconnected.

INSTALLATION
1. To install, reverse Removal procedure. Fill the windshield washer reservoir and operate system to check for leaks.

WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL, WHICH IS POISONOUS. OBSERVE ALL CAUTIONS AND WARNINGS INDICATED ON LABEL OF WASHER SOLUTION CONTAINER.