Cleaning

1. Wash all parts except ball bearings, O-rings and seals in a suitable cleaning solvent. Brush or scrape all foreign matter from the parts. Be careful not to damage any parts with the scraper.

CAUTION: Do not clean, wash or soak transmission seals in cleaning solvents or transmission seals could be damaged. Do not allow bearings to spin when drying with compressed air. Dry all parts with compressed air.

2. Rotate ball bearings in a cleaning solvent until all lubricant is removed. Hold bearing assembly to prevent it from rotating and dry it with compressed air.
3. Lubricate bearings with Multi-Purpose Grease DOAZ-19584-AA or equivalent meeting Ford specification ESB-M1C93-A and wrap them in a clean, lint-free cloth or paper until ready for use.
4. Clean the magnet in the bottom of the case with kerosene or mineral spirits.