Assembly

1. Install main control cover.





2. Install two guide pin bolts and eleven valve body cover retaining bolts. Tighten guide pin bolts to 9-11 Nm (80-97 inch lbs.) and valve body cover retaining bolts to 9-11 Nm (80-97 inch lbs.) in sequence shown.





3. Install coasting booster valve shuttle balls, converter drain back valve and solenoid screen.
4. Install separator plate and new gaskets.





5. Install reinforcement plates. Tighten retaining bolts to 9-11 Nm (80-97 inch lbs.) in sequence shown.





6. Inspect O-rings on solenoids for damage. Install shift solenoid assembly and torque converter clutch solenoid.





7. Install bracket and retaining bolt. Tighten to 9-11 Nm (80-97 inch lbs.).