Instrument Cluster

Inspection and Verification
1. Verify the customer's concern by operating the instrument cluster to duplicate the condition and by observing the indicators and gauges to determine if they are operating properly with the ignition switch:

- in RUN without the engine running.
- in START before the ignition switch is released.
- in RUN with the engine running.

2. Inspect to determine if any of the following mechanical or electrical concerns apply:

Mechanical
- Damaged fuel tank.
- Low engine coolant level.
- Low brake fluid.
- Low engine oil level.
- Accessory drive belt.

Electrical
Fuse junction panel fuse:

-- 8(10A)
-- 15(10A)
-- 18(20A)

Circuit wiring.
Switches or sensors.

3. If the inspection reveals obvious concern(s) that can be readily identified, service as required.
4. If the concern(s) remains after the inspection, determine the conditions and go Conventional Instrument Cluster