Climate Control Assembly Switch

REMOVAL
1. Remove climate control assembly.
2. Remove knob.
3. Disconnect wire connector from heater blower motor switch or wire connector and vacuum bundle from A/C-heater function selector switch.
4. Remove retaining screw and heater blower motor switch or A/C-heater function selector switch.

INSTALLATION
1. Position heater blower motor switch or A/C-heater function selector switch on heater control. Make sure retaining tabs on heater blower motor switch or A/C-heater function selector switch are engaged in slots. Install retaining screw.
2. Connect wire connector to heater blower motor switch or wire connector and vacuum bundle to A/C-heater function selector switch.
3. Install knob.
4. Install heater control as an assembly in instrument panel.
5. Check system for proper operation.