Outside Mirror

REMOVAL
1. Disconnect battery ground cable.
2. Remove front door trim panel.
3. Carefully pry off rear view mirror mounting hole cover.
4. Disconnect outside rear view mirror motor connector and remove necessary wiring guides.
5. Remove the three retaining nuts. Remove the outside rear view mirror while guiding the outside rear view mirror wiring and connector through the hole in the front door.
6. Remove screw in door window opening front outer filler. Remove door window opening front outer filler assembly if necessary.

INSTALLATION
1. To install, reverse removal procedure. Tighten door window opening front outer filler screw. Tighten outside rear view mirror retaining nuts to 11-13 N.m (97-115 Lb-In).