Cylinder Block Assembly

Cylinder Head Surface (Deck)
Flatness Deviation, Maximum [2] 0.025/25 x 25.050/150 x 150
Cylinder Bore
Grade 1 84.80-84.81 mm
Grade 2 84.81-84.82 mm
Grade 3 84.82-84.83 mm
Out-Of-Round, Maximum 0.025 mm
Surface Finish (RMS) 2.0-6.0 microns
Taper, Limit + 0.025 mm T-0.013 mm
Main Bearing Bore
Diameter 62.287-62.300 mm

[1] Coat with teflon pipe sealant before installation.
[2] Over the entire cylinder head gasket surface.