Throttle Cable/Linkage: Service and Repair

1. Remove the accelerator cable from the throttle control lever.
2. Loosen the locknuts at the accelerator cable bracket located near the throttle body.
3. Squeeze the lock tabs and remove the accelerator cable from the accelerator pedal and shaft.
4. Squeeze the lock tabs securing the accelerator cable housing to the bulkhead.
5. Remove the accelerator cable from the accelerator cable clip on the cylinder head.
6. Remove the accelerator cable from the vehicle.
7. To install, reverse the removal procedure. Adjust the accelerator cable deflection and wide open throttle position. Adjustments