QT5 Perform Super Star II Hookup
- Verify that a failure has been detected in the ABS. (An illuminated anti-lock brake warning indicator in the Key ON-Engine Running mode indicates a present failure. If the anti-lock brake warning indicator is not illuminated in Key ON-Engine Running mode but symptom exists, it may indicate a past or intermittent problem.)
- Key OFF.
- Access the Data Link Connector (DLC) located in the engine compartment.
- Connect a Rotunda Super STAR II Tester 007-0041B or equivalent to the DLC using Super MECS Adapter 007-00052 or equivalent.
- Place the adapter in the "ABS" position.
- Place the tester in the "MECS" position.
- Latch the Super STAR II Tester to the "Test" position.
- Is the Super STAR II hooked up properly?
YES -- Proceed to QT8. QT8 Perform ABS Diagnostic Trouble Code Retrieval
NO -- Re-attempt this step. Service any faults if necessary.