F2 Check Circuit Between Instrument Cluster and ABS Unit

- Ignition switch OFF.

- Disconnect 4-pin and 15-pin connectors at ABS unit.

- Remove instrument cluster.

- Disconnect 16-pin instrument cluster.

- Measure resistance between pin 5 of the 16-pin connector and ground.

- Is resistance less than 5 ohms?

YES -- Service short in circuit 603 (DG) wire to ground.

NO -- Replace ABS unit.

Connector:

Pin Number Circuit Circuit Function

1 2 (W/LB) Right Turn Indicator
2 794 (LB) Low Coolant Indicator Feed
3 608 (BK/Y) Air Bag Indicator Feed
4 128 (P/Y) Brake Indicator Feed
5 603 (DG) Anti-Lock Indicator Feed
6 397 (BK/W) Ground
7 11 (T/Y) Tachometer Feed
8 651 (BK/Y) Ground
9 640 (R/Y) 12V Input
10 208 (GY) Low Oil Indicator
11 19 (LB/R) Illumination Lamps Feed
12 450 (DG/LG) Fasten Belts Indicator
13 640 (R/Y) 12V Input
14 875 (BK/LB) Ground
15 31 (W/R) Oil Pressure Gauge Feed
16 57 (BK) Ground