Quarter Window Regulator: Service and Repair

Window Glass, Rear Quarter-Convertible Removal and Installation

1. Remove quarter trim panel (31012). Refer to Section 01-05. Remove inner and outer belt weatherstrip.
2. Remove radio speaker bracket.
3. Remove watershield.
4. Lower quarter window glass (29710).
5. Remove lower screw (X) and raise quarter window glass to access upper two screws (Y and Z). Remove quarter window glass
6. Disconnect electrical connector to window regulator electric drive (23394).
7. Remove two screws and one nut retaining quarter window regulator (30306) to quarter panel and remove quarter window regulator from vehicle.
8. To install, reverse Removal procedure. Adjust quarter window glass as outlined under Adjustments. Tighten screws and nut to 7.5-10.5 N.m (67-92 lb-in).
9. Remove three screws retaining window regulator electric drive to quarter window regulator and remove window regulator electric drive.
10. To install, reverse Removal procedure. Tighten screws to 5.6-9.6 N.m (50-84 lb-in).