Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

E8 Check Circuit 603 Between Cluster and Module







- Ignition switch OFF.

NOTE: Circuit 603 changes color from DG to Y as it passes through the harness connector.

Connector:




Connector:





- Measure resistance between pin 2 (Y) of the 4-pin connector and pin 5 (DG) of the instrument cluster connector.

- Is resistance less than 5 ohms?

YES -- Go to E9. E9 Check ABS Control Module Ground

NO -- Service circuit 603 (Y) for open.