Air Cleaner Housing: Service and Repair

Air Cleaner Assembly:

REMOVAL

1. Remove air cleaner outlet tube.

2. Disconnect engine control sensor wiring connections at mass airflow sensor and intake air temperature sensor.

3. Remove engine air cleaner retaining bolts and remove engine air cleaner from vehicle.

INSTALLATION

1. Position engine air cleaner in vehicle. Ensure that mounting grommets are installed with metal side up.

2. Install bolts through rubber grommets (metal side up). Tighten engine air cleaner retaining bolts to 7.6-10.4 Nm (67-89 lb in).

3. Connect engine control sensor wiring connections to mass airflow sensor and intake air temperature sensor.

4. Install air cleaner outlet tube.