Equipment Hookup

Equipment Hookup

Using SUPER STAR II Tester

- Turn the ignition switch (11572) to OFF.

- Connect the adapter cable's two service connectors to the vehicle's appropriate data link connectors (14489).

After equipment hookup, go to Self-Tests.




Using Analog Voltmeter

- Turn ignition switch to OFF.

- Connect a jumper wire from Self-Test input (STI) to Pin 2, Signal Return on the data link connector (refer to the diagram).

- Set analog VOM on a DC voltage range to read from 0 to 15 volts DC. Connect VOM from battery (+) to Pin 4 Self-Test Output (STO) in the data link connector.

After equipment hookup go to Self-Tests.