Revised EGR Valve Wiring Harness

Article No.
95-5-7

03/13/95

^ EGR VALVE - REVISED EGR VALVE WIRING HARNESS - VEHICLES WITH 2.5L ENGINE BUILT THROUGH 4/14/94 - SERVICE TIP

^ EGR VALVE WIRING HARNESS - REVISED WIRING FOR EGR VALVE - VEHICLES WITH 2.5L ENGINE BUILT THROUGH 4/14/94 - SERVICE TIP

FORD:
1993-94 PROBE

ISSUE:
It it becomes necessary to replace the EGR valve, the EGR wiring harness may not connect with the new EGR valve due to a revised connector on the valve.

ACTION:
When replacing the EGR valve, install an EGR wire harness jumper to connect the vehicle harness to the new EGR valve.





Parts Block

OTHER APPLICABLE ARTICLES: NONE

WARRANTY STATUS: INFORMATION ONLY

OASIS CODES: 203200, 403000, 499000