Intake Air Duct: Service and Repair

REMOVAL and INSTALLATION

1. Open hood.

2. Disconnect wire harness from intake air temperature sensor.

3. Disconnect crankcase ventilation tube from air cleaner outlet tube.

4. Loosen engine air cleaner tube clamps on air cleaner outlet tube.

5. Disconnect air cleaner outlet tube from throttle body.

6. Disconnect air cleaner outlet tube from mass airflow sensor and remove air cleaner outlet tube.

7. To install, reverse removal procedure. Tighten engine air cleaner tube clamps to 2.3-3.2 Nm (20-28 lb in).