Evaporative Emission Control Canister: Service and Repair

REMOVAL
^ Raise vehicle on hoist.
^ Disconnect fuel vapor hose push pin or pins (Depending on application) from front fender apron.
^ Remove fuel vapor canister to front fender apron retaining bolts and partially lower fuel vapor canister and fuel vapor canister bracket.
^ Disconnect fuel vapor hose and fuel and vapor return tube from fuel vapor canister. Also disconnect fuel vapor return tube from fuel vapor canister.
^ Remove fuel vapor canister to fuel vapor canister bracket retaining bolt and remove fuel vapor canister from fuel vapor canister bracket.

INSTALLATION
^ To install, reverse removal procedure. Tighten canister to canister bracket bolt to 5.2-7.2 Nm (46-63 in lb) and canister bracket retaining bolts to 8.6-10.4 Nm (76-89 in lb).