44-3 Check RH Front Air Bag Sensor Ground

^ Disconnect the RH front air bag sensor connectors.

^ Measure the resistance of circuit 936 (BR/Y) between the connector leading to the RH front air bag sensor and ground.

^ Is the resistance less than 2 ohms?

YES -- Locate and service the open in circuit 936 (BR/Y) between the RH front air bag sensor and the air bag diagnostic monitor. Reconnect the system. Verify the system. Reactivate the system.

NO -- Go to 44-4. 44-4 Check RH Front Air Bag Sensor Mounting