Attachment II - Labor and Parts Information

ATTACHMENT II

SAFETY RECALL 93S64

1993 Probe Liftgate Strut Pivot Pin

LABOR ALLOWANCES

Inspect

0.2 Hrs. - Insert in Box "A" on Form 1864

Remove/Install One Liftgate Strut (Includes Inspection Time Above, and Supplementary Time for Second Drive-in of Vehicle).

0.4 Hrs. - Insert in Box "B" on Form 1864

Remove/Install Both Liftgate Struts (Includes Inspection Time Above, and Supplementary Time for Second Drive-in of Vehicle).

0.5 Hrs. - Insert in Box "C" on Form 1864

Administrative Allowance 0.1 Hrs.

NOTE:
Add 0.1 hour Administrative Allowance to the total repair time.

PARTS REQUIREMENTS
Parts will not be direct shipped for this recall. Order your parts by calling Renkim Corporation (1-800-325-5621). When ordering your parts, please be prepared to do the following:

^ Announce Recall 93S64
^ Give your name, Dealer name, P&A code
^ VIN, engine, transmission, rear wiper/washer options

PARTS RETURN

Return the removed strut(s), freight prepaid to:

Warranty Parts Return Center
1285 South Mill Street
Plymouth, Mi. 48170
c/o Safety Recall 93S64

CLEARLY MARK ON OUTSIDE OF BOX: PROGRAM 93S64

Wire tag the removed strut(s) - include your:

- P&A Code
- Vehicle VIN Number
- Program 93S64

NOTE:
The Warranty Parts Return Center will not be issuing an FPS-700 for the return of this strut(s). Therefore, return removed strut(s) immediately.