Air Cleaner Housing: Service and Repair

REMOVAL

1. Remove the fresh air duct/resonance chamber No. 1 assembly.

2. Disconnect the Mass Air Flow (MAF) sensor connector and the Intake Air Temperature (IAT) sensor connector.

3. Loosen the clamp between the MAF sensor and the air duct.

4. Remove the air cleaner upper cover.

5. Remove the air cleaner element.

6. Remove the two air cleaner lower cover bolts and nut.

7. Remove the air cleaner lower cover,

INSTALLATION

1. Install the air cleaner lower cover into its mounting position.

2. Install the two air cleaner lower cover bolts and nut. Tighten the air cleaner lower cover bolts and nut to 19-25 Nm (14-19 lb ft).

3. Install the air cleaner element into air cleaner lower cover.

4. Install the air cleaner upper cover to the air duct and tighten the clamp.

5. Install the air cleaner upper cover to the air cleaner lower cover.

6. Connect the MAF sensor connector and the IAT sensor connector.

7. Install the fresh air duct/resonance chamber No. 1 assembly.