FA5 - Check Fuel Pump Relay to PCM Continuity

- Key Off.

- Remove the fuel pump relay.

- Disconnect the Powertrain Control Module (PCM).

- Install the Rotunda Breakout Box 007-00033 or equivalent.

FA10 - Fuel Pump Relay To PCM Continuity:

- Measure the resistance of the following wires between the fuel pump relay and the PCM.

- Is the resistance less than 5 ohms?

YES -- Go to FA6. FA6 - Check Inertia Fuel Shutoff Switch

NO -- Service wire(s) in question for open.