Convertible

The Window Control Switch in each door sends current through the Window Motor in one direction for UP and the opposite direction for DN.

The current causes the Window Motor to turn in a clockwise or counterclockwise direction to raise or lower the window.

In the OFF position, both motor wires are grounded through separate switch contacts.

When the DN switch is pushed, power flows to the DN Motor lead. The UP lead acts as ground.

When the UP switch is pushed, power flows to the UP Motor lead. The DN lead acts as ground.

The Convertible System is protected by the Window Safety Relay and In-Line Circuit Breaker. The relay (and the windows) operate in ACC or RUN only.

Each motor assembly also has a circuit breaker to cut off power if a switch is held too long in the UP or DN position.

The Convertible System has a Window Lock Switch cuts power to the passenger window switches. This allows only the driver to operate the windows from the Master Window Control Switch.