A10 - Check Right Coil Pack VBAT - KOEO - Spark Fault

^ Key off.

^ DVOM on 20 volt DC scale.

^ Install the right 2.3L coil tee (the word "coil" is written in blue letters).

^ Key on.

^ Reconnect coil.

^ Measure voltage between (+)J26 (COIL PWR R) and (-)J60 (B-).

^ Is voltage greater than 10 volts DC?


YES -- Go to A11.


NO -- Check connector. Service or replace harness. COIL PWR open.