Engine Control Module: Service and Repair
REMOVAL1. Disconnect the negative battery cable.
2. Disengage the push pin retainers from the LH and RH inner kick panel and remove these panels
3. Remove the mounting bolts from the ECA floorpan bracket.
Electronic Control Assembly Removal:
4. Slide the ECA toward the driver's side of the vehicle and disconnect the electrical connectors from the ECA.
Electronic Control Assembly Removal:
5. Remove the ECA from the vehicle.
Electronic Control Assembly Removal:
INSTALLATION
1. Connect electrical connectors to the ECA..
2. Install the ECA to the floorpan bracket and install the mounting bolts.
3. Install the LH and RH inner kick panels to the center console and secure with removed push pins.
4. Connect the negative battery cable.