Camshaft Timing Check

Timing Belt Cover:

1. Remove the access plug from the cam drive belt cover.

NOTE: An access plug is provided in the cam drive belt cover so that camshaft timing can be checked without removal of the cover or any other parts.

Timing Compoments And Timing Mark Alignment:

2. Set the crankshaft to TDC by aligning the 0 mark on the belt cover with the 0 mark on the crankshaft pulley. Always turn the engine in the direction of normal rotation. Backward rotation may cause the timing belt to jump time, due to the arrangement of the belt tensioner.
3. Look through the access hole in the belt cover to ensure the timing mark on the cam drive sprocket aligns with the pointer on the inner belt cover.
4. Remove the distributor cap. Check that the distributor rotor is facing the No. 1 position on the distributor cap.
5. Install the distributor cap.
6. Install the belt cover access plug.