Engine Torque Specifications
| Alternator Adjuster Arm to Alternator | 61-83 Newton Meter (Nm) |
| Alternator Brace Arm to Alternator | 20-30 Newton Meter (Nm) |
| Alternator Bracket to Block | 42-58 Newton Meter (Nm) |
| Alternator Pivot Attaching | 61-83 Newton Meter (Nm) |
| Belt Tensioner Attaching | 23-30 Newton Meter (Nm) |
| Camshaft Sprocket to Cam | 50-62.5 Newton Meter (Nm) |
| Camshaft Thrust Plate to Head | 10-15 Newton Meter (Nm) |
| Connecting Rod Cap to Rod | 26-34 Newton Meter (Nm) |
| Crankshaft Pulley Attaching | 100-121 Newton Meter (Nm) |
| Crankshaft Rear Seal Retainer to Block | 8-11 Newton Meter (Nm) |
| Crankcase Vent Hose Clamp Attaching | 1.25-2.25 Newton Meter (Nm) |
| Cylinder Head to Block | - Tighten attaching bolts in sequence to 60 Nm (44 lbft). Loosen bolts approximately two turns, retighten all bolts to 60 Nm (44 lb ft). Turn all bolts 90 degrees in the same sequence. Complete bolt tightening by turning bolts an additional 90 degrees. |
| Distributor Cap Attaching | 2-2.6 Newton Meter (Nm) |
| Distributor Clamp to Block | 8-11 Newton Meter (Nm) |
| Exhaust Manifold to Cylinder Head | 21-27 Newton Meter (Nm) |
| EGR Valve Stud to Intake Manifold | 5-10 Newton Meter (Nm) |
| EGR Valve to Spacer Stud Nut | 18-26 Newton Meter (Nm) |
| Fan Switch to Water Outlet Housing | 7-11 Newton Meter (Nm) |
| Flywheel to Crankshaft | 73-87 Newton Meter (Nm) |
| Fuel Charging Assembly to Manifold Stud | 5-10 Newton Meter (Nm) |
| Fuel Charging Assembly to Manifold Stud Nut | 16-25 Newton Meter (Nm) |
| Intake Manifold to Head Stud Nut | 16-20 Newton Meter (Nm) |
| Intake Manifold Stud to Head/Exhaust Manifold to Head | 2-10 Newton Meter (Nm) |
| Main Bearing Cap to Black | 90-108 Newton Meter (Nm) |
| Oil Filter | - Tighten oil filter 3/4 of a turn after gasket contact with surface. |
| Oil Filter Adapter to Block | 28-35 Newton Meter (Nm) |
| Oil Gallery Pipe Plugs | 11-16.5 Newton Meter (Nm) |
| Oil Pan Drain Plug | 20-34 Newton Meter (Nm) |
| Oil Pan to Block | 20-30 Newton Meter (Nm) |
| Oil Pan to Transaxle | 40-54 Newton Meter (Nm) |
| Oil Pump Cover | 8-12 Newton Meter (Nm) |
| Oil Pump Main Discharge Plug | 28-32 Newton Meter (Nm) |
| Oil Pump Relief Valve Plug | 16-20 Newton Meter (Nm) |