Without Scan Tool

With Scan Tool
With the Scan Tool Connect the scan tool to the data link connector, then check diagnostic trouble codes.

CAUTION: Turn the ignition switch off before disconnecting or connecting the scan tool.

NOTE: Diagnostic trouble code No. 16 can be output when the ABS system fails because of a battery surge.

With The ABS Warning Light





1. Use the special tool (diagnostic trouble code check harness) to ground the terminal (1) of the data link connector.





2. Take a reading of the diagnostic trouble code from the flashing of the ABS warning light.

NOTE: Diagnostic trouble code No. 16 can be output when the ABS system fails because of a battery surge.