Vehicles For USA

Right hand assembly

CAUTION: When removing and installing the floor console assembly, don't allow any impact or shock to the SRS diagnosis unit.

DRIVING DEVICE ASSEMBLY REMOVAL STEPS
- Front pillar trim
1. Shoulder belt tongue plate
2. Release switch connector
3. Harness connector
4. Driving device assembly

SHOULDER BELT REMOVAL STEPS
- SRS diagnosis unit and bracket
5. Outer switch connector
6. Automatic seat belt control unit connector
7. Automatic seat belt control unit
8. Retractor assembly (for shoulder belt)

BUCKLE REMOVAL STEPS
- Rear console box assembly
9. Front seat
- Front seat hinge cover
10. Buckle

LAP BELT REMOVAL STEPS
- Scuff plate or center pillar lower trim

11. Retractor assembly (for lap belt)




Left Hand Assembly

SEAT BELT REMOVAL STEPS
- Quarter trim or center pillar lower trim
12. Sash guide cover
13. Cap
14. Seat belt
15. Center pillar trim
16. Center pillar upper trim
17. Adjustable seat belt anchor

BUCKLE REMOVAL STEPS
- Rear console box assembly
18. Harness connector
19. Front seat hinge cover
20. Buckle

INSTALLATION SERVICE POINTS





Buckle Installation
Securely insert the front seat belt stopper tab into the seal belt stopper notch.

Outer Seat Belt Installation





1. Securely insert the retractor stopper tab into the body hole.





2. Securely insert the belt guide tab into the body hole.





REAR SEAT BELT
Removal steps
- Rear seat
1. Inner, outer Seat belt (center seat belt)
2. Inner seat belt
3. Sash guide cover
4. Seat belt garnish <4-door models for U.S.> I 5. Outer seat belt