Front Door Panel: Service and Repair

DOOR TRIM AND WATERPROOF FILM REMOVAL AND INSTALLATION
3-dimensional molded door trim removal steps

1. Pull handle
3. Cover
4. Clip
5. Regulator handle
6. Escutcheon
7. Power window switch
8. Door lock switch (Passenger's side)
9. Door trim
10. Door inside handle
11. Pull handle bracket
12. Waterproof film

Flat door trim removal steps
2. Armrest
3. Cover
4. Clip
5. Regulator handle
6. Escutcheon
9. Door trim
10. Door inside handle
12. Waterproof film

REMOVAL SERVICE POINTS





Clip Removal
Remove the clip by using a rag, and then remove the regulator handle.





Power Window Switch Removal
The power window switch has clips at the front, so use the special tool to remove the switch from the front.

INSTALLATION SERVICE POINTS





Regulator Handle Installation
1. Install the escutcheon and the clip to the regulator handle.
2. Fully close the front door glass, and install the regulator handle so that it faces as shown in the illustration.