Assembly

B. UPPER VALVE BODY SUB ASSEMBLY INSTALLATION

Install the special tool, then, after securing the upper separating plate and the intermediate plate by the eight installation bolts, remove the special tool.

Upper valve body sub assembly mounting bolts: 5.0 Nm (3.5 ft.lbs.)




C. OIL FILTER/STEEL BALL/RELIEF SPRING INSTALLATION

Install, to the intermediate plate, the oil filter, the two steel balls, and the spring.




D. LOWER VALVE BODY SUB ASSEMBLY INSTALLATION

1. Install the special tool to the intermediate plate.




2. Install the separating plate.








3. After securing the lower valve body by the installation bolts, remove the special tool.

Lower valve body mounting bolts: 5.0 Nm (3.5 ft.lbs.)

E. SOLENOID VALVE ASSEMBLY INSTALLATION

Install each solenoid valve in the position shown in the figure.

Solenoid valve assembly mounting bolts: 5.0 Nm (3.5 ft.lbs.)