Assembly

a: Special Tool

Transaxle Special tool: (F3A21 - Part No. MD998820), (F4A22- Part No. MD998824)




B. TRANSFER DRIVE GEAR INSTALLATION

1. Install the transfer drive gear in proper direction. The direction can be identified by the groove provided in one of the pinion side surfaces.

Caution: Replace the output flange and transfer drive gear as a set.

a: Special Tool

Transaxle Special tool: (F3A21 - Part No. MD998820), (F4A22- Part No. MD998824)




C. BEARING INSTALLATION

a: Special Tool

Transaxle Special tool: (F3A21 - Part No. MD998820), (F4A22- Part No. MD998824)




D. SNAP RING SELECTION

1. Select a snap ring, which should be the thickest one that can be installed in groove.

Standard value: 0-0.06 mm (0-0.0024 in.)