Without Cruise Control

Accelerator Cable Adjustment Bolts:

1. Turn the ignition on (without starting the engine) for approx. 15 seconds minimum.
2. Loosen the adjusting bolts.
3. Adjust the accelerator cable free play.

Clearance:
M/T, 3 A/T: 0.04 - 0.08 in. (1 - 2 mm)
4 A/T: .12 - .20 in. (3 - 5 mm)

4. Tighten the adjusting bolts.
5. Confirm that the throttle valve fully opens and closes by operating the accelerator pedal.

Accelerator Cable, Throttle Body End:

6. Confirm that the throttle lever stopper touches the idle position switch.