Shoulder Belt Retractor Switch Test

Shoulder Belt Retractor Switch Test

Fig. 10 Shoulder Belt Retractor Switch Voltage:

1. Using suitable volt/ohmmeter, check resistance in open switch of RH switch at cavity 6 and LH switch at cavity 5, refer to SCHEMATIC DIAGRAMS/ELECTRICAL AND ELECTRONIC DIAGRAMS. Resistance should be more than 3,000 ohms.
2. Check resistance in closed switch of RH switch at cavity 6 and LH switch at cavity 5, refer to SCHEMATIC DIAGRAMS/ELECTRICAL AND ELECTRONIC DIAGRAMS. Resistance should be less than 40 ohms.
3. Ensure voltage is concurrent with voltages shown.