Parts and Labor

PARTS

Important:
A quantity of parts will be distributed initially and billed to all involved dealers. This quantity will cover a portion of the total vehicles involved. Additional parts may be ordered as needed to support customer demand.

Each involved dealer, to whom vehicles in the recall were invoiced (or the current dealer at the same street address), will receive enough Emission Service Packages, Recall P/N C3905900, to service 25% of those vehicles.

Each parts package contains the following components:

Quantity Description

1 Oxygen Sensor
1 Catalytic Converter
1 Gasket
1 Clamp
4 Bolt
4 Nut
1 Instruction Sheet

Use the following labor operation number and time allowance:

Labor Operation Time
Number Allowance

Replace Oxygen Sensor 25590182 0.6 Hours
and Catalytic Converter

Add the cost of the recall parts package plus applicable dealer allowance to your claim.

Note:
See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing instructions.

PARTS RETURN

Removed catalytic converters must be returned to the Warranty Material Return Center.

Initially, a small number of oxygen sensors are required to be returned to the Warranty Material Return Center. When an adequate number of returned parts have been accumulated, Parts Return Documents will no longer be generated and parts are to be discarded.

Note:
See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing and material return instructions.