With Cruise Control

1. Remove the air cleaner.

Accelerator Cable Adjustment:

2. Loosen the adjusting bolts.

Accelerator Cable And Pedal Assembly (W/ Cruise Control):

3. First, adjust accelerator cable B in and out movement (throttle valve side), using the adjustment bolts.

Clearance: 0.04-0.08 in.
(1-2 mm)

4. Tighten the adjusting bolts.

Accelerator Cable, Throttle Body End:

5. Confirm that the throttle lever contacts the idle position switch.

Cable "A" Adjustment Point:

6. Next, adjust accelerator cable A in and out movement (accelerator pedal side) using the adjustment nut. With the intermediate link A of the actuator held against the stopper, adjust the A cable to the standard clearance and tighten the locking nut.

Clearance: 0-0.04 in.
(0-1 mm)

Intermediate Link Clearance Check Point:

7. After adjustment recheck to ensure that the engine side cable has the specified clearance.
8. Confirm that the throttle valve fully opens and closes by operating the accelerator pedal.