Stator: Testing and Inspection

Fig. 3 Testing Stator Assembly:

1. Using a suitable ohmmeter, check resistance across each stator wire connections.
2. Connect test leads to wires A and B, then note resistance.
3. Connect test leads to wires B and C, then note resistance.
4. Connect test leads to wires A and C, then note resistance.
5. Resistance across each stator wire should not exceed .1± .01 ohms. on 60 amp stators or .08 ohms ±.008 ohms on 75 amp stators. Replace stator if resistance is not as specified.