Tone Ring - Installation

FRONT TONE WHEEL

1. Make sure mating surface of tone wheel and hub and bearing is clean.









2. Install tone wheel (4) through seal (1) on rear of knuckle (3) and against rear of hub and bearing assembly (2).
3. Using same bolt or identical replacement bolt (5), mount tone wheel to hub and bearing. Tighten bolt to 17 Nm (150 in. lbs.).

4. Verify proper wheel speed sensor-to-tone wheel air gap. Brake Specifications
5. Install brake caliper. Disc Brake Caliper - Installation.
6. Install tire and wheel assembly Tires and Wheels - Installation. Progressively tighten the wheel mounting nuts in the proper sequence to 135 Nm (100 ft. lbs.).
7. Lower vehicle.
8. Road test vehicle to ensure proper operation of base and antilock brakes.