VTSS Will Not Arm

VTSS WILL NOT ARM

For a complete wiring diagram, refer to the Wiring Information .





CHECK THE BCM FOR DTCS
1. Ensure both doors are closed.
2. With the scan tool check the following:
3. Read the active BCM DTCs.
4. Check that the driver and passenger door ajar switch states display open with the doors closed.
5. Check that the Ignition Status displays Lock with the ignition key in the Lock position.

Were there any problems found?

Yes

- Diagnose and repair the DTC(s).
- Perform the VTSS VERIFICATION TEST. VTSS Verification Test

No

- Replace the Body Control Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test