Right Fog Lamp Output Shorted

RIGHT FOG LAMP OUTPUT SHORTED








1. INTERMITTENT CONDITION
1. Turn the ignition on.
2. With the scan tool, clear all BCM DTC's.
3. Turn the Fog Lamps on.
4. With the scan tool, read the DTC information.

Does the scan tool read: Right Fog Lamp Output Shorted?

Yes

- Go To 2

No

- The condition that caused the symptom is currently not present. Inspect the related wiring for a possible intermittent condition. Look for any chafed, pierced, pinched, or partially broken wires.
- Perform BODY VERIFICATION TEST. Body Verification Test

2. FOG LAMP
1. Turn the ignition off.
2. Remove and install a known good Fog Lamp in place of the Right Fog Lamp.

Does the Right Fog Lamp operate normally?

Yes

- Replace the Fog Lamp.
- Perform BODY VERIFICATION TEST. Body Verification Test

No

- Go To 3

3. BODY CONTROL MODULE
1. Turn the ignition off.
2. Remove the Right Fog Lamp.
3. Measure the voltage of the Right Fog Lamp Output circuit and ground.

Is the voltage above 1.0 volts?

Yes

- Repair the Right Fog Lamp Output circuit for a short condition.
- Perform BODY VERIFICATION TEST. Body Verification Test

No

- Replace the Body Control Module.
- Perform BODY VERIFICATION TEST. Body Verification Test