40 Passenger Window Switch Stuck Up

40-PASSENGER WINDOW SWITCH STUCK UP



- When Monitored:
Whenever the ignition is in the Run or Accessory position.

- Set Condition:
When the switch input is active for over 10 seconds.





DTC PRESENT
1. Turn the ignition on.
2. With the scan tool, erase the DTCs.
3. Cycle the ignition switch from Off to Run.
4. With the scan tool, read the DTCs.

Does the scan tool display 40-PASSENGER WINDOW SWITCH STUCK UP?

Yes

- Replace the Window Switch.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- The condition that caused the code to set is not present at this time. Operate the switch several times to ensure it does not stick. If the switch ever sticks, replace it.
- Perform the BODY VERIFICATION TEST. Body Verification Test.