34 Country Code Not Programmed

34-COUNTRY CODE NOT PROGRAMMED



- When Monitored:
Continuously.

- Set Condition:
The BCM does not learn the country code within 10 seconds.





SET CORRECT COUNTRY CODE
1. Turn the ignition on.
2. With the scan tool, select ECU View.
3. Select the correct country code for the vehicle.
4. With the scan tool, erase BCM DTCs.
5. Cycle the ignition switch off then on and wait approximately i minute.
6. Select the correct country code for the vehicle

Does this DTC reset?

Yes

- Replace/update the Body Control Module (BCM).
- Perform the BODY VERIFICATION TEST. Body Verification Test

No

- Repair complete.
- Perform the BODY VERIFICATION TEST. Body Verification Test