03 MIC (Cluster) Messages Not Received

03-MIC (CLUSTER) MESSAGES NOT RECEIVED



- When Monitored:
Continuously with the ignition in run.

- Set Condition:
The BCM does not receive any PCI Bus messages from the MIC (Cluster).





1. ATTEMPT TO COMMUNICATE WITH THE MIC (CLUSTER)
1. Turn the ignition on.
2. With the scan tool, select ECU View.
3. Verify that the MIC (CLUSTER) is active on the bus.

Is the MIC (CLUSTER) active on the bus?

Yes

- Go To 2

No

- Perform the No Response diagnostic procedure. Communications - Verbose Codes

2. CHECK FOR ADDITIONAL COMMUNICATION RELATED DTC'S
1. With the scan tool, select Network View and select Advanced.

Is there more than one module with active DTCs "Logged Against" the MIC (CLUSTER)?

Yes

- Replace/update the MIC (CLUSTER).
- Perform the BODY VERIFICATION TEST. Body Verification Test

No

- Replace/update the module that set this DTC.
- Perform the BODY VERIFICATION TEST. Body Verification Test