Intake Manifold - Removal

REMOVAL





1. Remove the engine covers (1).
2. Perform the fuel system pressure release procedure Service and Repair
3. Disconnect the fuel supply line Service and Repair





4. Disconnect the negative battery cable.





5. Remove the air cleaner housing (1) and clean air tube (2).
6. Disconnect electrical connectors for the following components:
- Manifold Absolute Pressure (MAP) Sensor
- Short runner valve (SRV)
- Fuel Injectors
- Electric Throttle Control (ETC )

7. Disconnect the brake booster hose, purge hose, and Make Up Air Hose (MUA).






NOTE: Remove the intake manifold and throttle body as an assembly.

8. Using the sequence shown, remove the intake manifold retaining fasteners
9. Remove intake manifold as an assembly.